Filtration
AIRLANCO’s catalog of dust collection solutions includes RLP Low-Pressure Reverse Air Filters, the E-86 filter, the CHC (Compact Horizontal Cartridge) filter, as well as the AVS and AST Pulse Jet Filters.
Economical AIRLANCO Cyclones come in three models designated HE, HV, and RC. They operate without any filter media to clean or replace and are custom-made for their intended applications.
AIRLANCO Machined and Fabricated Airlocks are widely used wherever dry solids need to be moved between areas of differing air pressure. They are found in our pneumatic conveying systems and are an essential component in our popular dust collection systems and cyclone receiver installations.
AIRLANCO Radial-Tip Industrial Fans are ruggedly built to provide safe, dependable operation. They are major components in dust collection systems and cyclone receiver installations and are also used for make-up air or general ventilation duty. Manufacturing techniques, refined for more than thirty five years in the air management industry, enable us to design for a wide range of conditions – with capacities from 1,000 to 100,000 CFM.
Contact AIRLANCO today for your custom CLEAN AIR solution.
Engineered for efficient operation in demanding installations with high airflow and high dust loads. Mechanical simplicity makes these weathertight filters mechanically superior.
Spun bond polyester media, others available upon request. 190°F Continuous operating temperature. Open pleat structure with wide pleat spacing to limit pleat pinching and bridging of product.
Much smaller than traditional bag houses. Many different media types and sizes are available to fit your custom applications.
The Pulse Jet Mechanism consists of compressed air header, diaphragm valve, solenoid, and timer. (Compressed air comes from external supply)
HE Cyclones can be ganged to handle high-moisture, high-temperature and high air volume applications.
Engineered to handle very large air volumes, specifically for outdoor installations where physical size is unrestricted.
Typically used as primary receivers for dry bulk solids in our pneumatic conveying systems.
Use where dry solids need to be moved between areas of differing air pressure. Models available for low and high differential air pressure systems, gravity feeds, and volumetric discharge devices.
Designed for low-pressure application on installations handling dust collection, plastics, feeds, and corrosive chemicals with 20" or less of water column pressure differentials.