En-Masse Conveyor provides years of trouble-free service under extreme applications. All wear parts are easy to replace making the conveyor very maintenance friendly.
The MODEL G™ is frequently used in such industries as chemical, coal, food, grain, municipal solid waste, mining, plastic, paper, pulp and rubber.
'G' style head'G' style head sections come with a plug relief door and switch
Pre-assembledAll conveyor sections are pre-assembled on a level 215ft fixtures, match-marked and dowel-pinned for field assembly. With proper rigging practices, Intermediate Sections can be assembled and shipped in multiples of up to 40 ft. lengths saving on field time
Durable finish~3 mils Powder Coat finish. The finish has a good hardness, excellent flexibility, excellent exterior stability, good chemical and solvent resistance, and a very good corrosion protection. All parts are powder coated before assembly. All fasteners are cadmium plated
Wear reductionAll liners use 1/2" welded studs attached to the exterior of the liner plates to eliminate wear points on the inside of the liners
Easy accessHead and tail housing assemblies are split for easy access
Visible bearingsOut-board mounted bearings on the head section
AdjustableRex ZT center pull take-up bearings on the tail section. Shaft seals are a Rino adjustable "packing-gland" split type
Internal conveyor splitAll internal conveyor sprockets are split, with four lifting holes and hardened to ~420 BHN. Split sprockets can be "turned around" for double life. "Walking Tooth Sprockets" used where applicable
Cotter-constructedConveyor chains are all cotter-constructed for ease of removal. All links are pre-heated prior to robotic welding of the attachment bars
Easy removalConveyor "By-Pass" inlets have a bolted side plate construction to ease removal/replacement of the internal liner plates without removal of the feed spout and or transition
Robotically weldedAll intermediate sections are pinned and robotically welded in fixtures to ensure squareness and length