Diluted Phase Pneumatic Transport Diluted Phase Pneumatic Transport

Image

During the diluted phase, the air must place the particles to be transported in suspension, which is why there is a departure speed of between 18 and 23 m/s. Transport pressures are usually between 0.2 and 0.8 bars (-0.5 bars max for vacuum).

 

The SABE pressurised diluted phase is used for:

  • Medium distances
  • A single departure point
  • Several destination points
  • Abrasive or fragile products

 

The SABE pressurised diluted phase should be avoided for:

  • Multi-product networks
  • Long distances and high speeds

 

The SABE vacuum diluted phase is used for: 

  • Medium distances
  • Several departure points
  • Abrasive or fragile products

 

The SABE vacuum diluted phase should be avoided for:

  • Multi-product networks
  • Long distances and high flow rates

Contact Us

Need more information? Fill out the form below and an AGI representative will connect with you.

Contact SABE

La Pérrauderie
85140 Chauche, France

Phone: +33-02-51-41-84-45
Fax: +33-02-51-41-80-28
Email: info@sabe.fr