Ultimax Drag Conveyors Ultimax Drag Conveyors

Image

Features:

  • Size: 225mm-300mm-350mm-400mm. Capacity: Up to 300M.T.P.H.
  • Capacities are based on material density of 25# / cu. ft. or 400 kg / m3 and 45# / cu. ft. or 721 kg / m3
  • No carryover of free flowing dry product when used to fill multiple bin systems and when operated in the ultra clean mode.
  • Superior capactity when used at Maximum fill capability. 
  • Spring loaded boot section for quick stop in vent of a chain break (Model 2). 
  • Heavy duty totally enclosed take up units ensure that the chain stays tight. 
  • Direct coupled gearbox, chain and sprocket, “V" belt drive systems are available. 
  • Component manufacturing provides for quick assembly and future extensions. 
  • Round top cover provides excellent weather protection and minimum dust build up. 
  • Drop gate discharge provides an opening with no paddle carryover bars. 
  • Adjustable control plate at the inlet provides for Ultra clean operation (below the chain) or Maximum capacity (above the chain).
  • Heavy duty construction, mild steel, galvanized or stainless steel fabrication.

Warning:
Explosion venting may be required depending on location and / or product being transferred through this equipment. To operate without proper explosion venting may result in fire or explosion. Check local industrial codes and policies.

Contact Information

927 S. Schifferdecker Avenue
Joplin, Missouri
USA, 64801

Phone: 1-417-623-2224
Fax: 1-519-595-8757
Email: mms@mitchellmillsystems.com